Adding value to your customers and your bottom line are priorities.


Undetected RUNNING TOILETS are the #1 cause of
your customers’ high-water bills

  • IF your customers KNOW that their toilet is running, they will usually “Jiggle the Handle”
  • But to actually FIX the problem, your customers need to call YOU because…
  • …running toilets are almost always REPEAT OFFENDERS that need your attention!
  • By selling and installing LeakAlertor 6000’s on all your customers’ toilets, every time the 6000 blinks red and beeps, your customers will know to call YOU! Installing the LeakAlertor on each of the toilets in your customers’ homes can quickly increase YOUR bottom line!

For more detailed information about how the LeakAlertor 6000 can increase callbacks and prevent your customers from getting high water bills due to running toilets and leaks, click here!

Installing the LeakAlertor for your customers INCREASES CALLBACKS and QUICKLY ADDS TO YOUR BOTTOM LINE

How does the LeakAlertor 6000 increase my callbacks?
The LeakAlertor 6000 audibly and visually notifies a customer of running toilets, leaking flappers and faulty fill valves. When you install the LeakAlertor (in less than 30 seconds), give your customer a Leave Behind Brochure personalized with your company’s contact information. When the LeakAlertor indicates there’s a problem by flashing red and beeping, they’ll call you for repairs.

OK, I see how I increase my callbacks, but how does the LeakAlertor 6000 prevent my customers’ from getting high water bills?
Running toilets are the #1 cause of a high water bill. When these issues occur, most people know to “Jiggle the Handle” (or in a worst case scenario, turn off the water) to temporarily fix the issue. What they don’t know is when to “Jiggle the Handle”. (Here’s a list of just a few reasons why) When you install the LeakAlertor 6000 they’ll know when their toilet is running, usually before they leave the bathroom, preventing a high water bill.

Can I include the LeakAlertor 6000 as a part of my plumbing company’s service plan?
Absolutely! The LeakAlertor 6000 can easily be included in any current service plan you’re offering. It can also be used as an “upgrade” or “premium level” plan option to tier your service plans. So, whenever your customer encounters a toilet leak, they can call you to come and fix the toilet!

I have a lot of customers. What options are there for quantity pricing?
The LeakAlertor 6000 is bulk packaged in 50 piece cases for quantity pricing. However, we offer the Plumbers’ Pack that includes 10 LeakAlertor 6000’s in a compact 12” x 9” x 2” box that fits conveniently in your truck at significantly reduced pricing. The pack includes pre-printed Leave Behind Brochures with your company’s name and phone number so that customers will call you when the LeakAlertor detects an issue. If you’re ready to get started or want to learn how you can add $60 to your bottom line in 60 seconds, contact us for more information!

Contact us:

•   Call 1 (877) LEAKALERTOR (877 532-5253),
•   Email us ( or,
•   Submit a request here.

Icon of a plumberWhat’s in it for you?

  • Increased Customer Call-Backs
  • Quick Install
  • Easy Sell-in
  • Turn-Key Program

Icon of customers What’s in it for your Customers?

  • Immediate alert to imminent toilet overflow
  • Detects leaks that cannot be seen or heard
  • Wide-Open flush valve alert

The Plumbers’ Pack

The Plumbers’ Pack is a compact kit which includes everything you need to install 10 LeakAlertors. It is packaged in a 12” x 9” x 2” box which fits conveniently in your truck. It includes personalized brochures so your customers can call you when the LeakAlertor detects a problem.

Adding LeakAlertor to your current service plan/product lines increases the number of ways your customers can work with you. The LeakAlertor increases sales, and shows your commitment to offering cutting edge products. Your customers will appreciate saving money, and the assurance of knowing when their toilet is leaking before they get a high water bill.

Plumbers Pack

Plumbers’ Leave-Behind Brochures LA6KLB AUG17

Click the button below to request detailed information on the Plumbers’ Pack.

Dye Tablets

5 Reasons why dye tablets are not accurate:

The LeakAlertor takes away the frustration of high water bills, and saves you money! Unlike dye tablets, the LeakAlertor is constantly at work checking for silent leaks, wide-open flappers, and faulty fill valves. It alerts you before you leave the bathroom with a “beep” and blinking LED during the flush cycle.

1) Errors are made in using dye tablets.
Often times, dye tablets are used incorrectly. Some people have mistakenly put the tablet in the toilet bowl rather than the toilet tank…test ruined! Some have put the tablet in the tank, and flushed the toilet immediately…test ruined! Some people drop the tablet in the tank, but then walk away and forget…again, test ruined!

2) Not all toilet leaks are caught by dye tablets.
Dye tablets can only detect one type of leak – a leaking flapper – and only if it’s leaking at the time of the test. However, stuck flush valves, wide-open flappers, phantom flushes, and running toilets are all common leaks not detected by dye tablets.

3) By the time you use a dye tablet your toilet may have already been leaking for weeks, or even months.
Often times, homeowners don’t realize a toilet is leaking because they think a leak should mean there is water on the floor. However, the most common leaks occur either at the flapper, or where the tank and bowl connect. These leaks occur inside the toilet, and are almost always invisible.

4) Intermittent leaks are often missed by dye tablets.
Just because your toilet isn’t leaking at the moment of testing doesn’t mean it wasn’t leaking an hour ago, or won’t be leaking an hour from now. Also, when a flapper first begins to leak, the amount may be too small for dye tablets to detect.

5) It’s not easy to get dye tablets.
Few hardware stores actually sell them, and it’s a hassle to contact your water utility for free tablets. You can buy them on-line, but you have to pay for shipping and wait for them to arrive. Meanwhile, your toilet continues to leak, and your water bill gets even higher!

7 Reasons why the flapper/flush-valve won't close:

1)  The flapper is “stuck” to the overflow pipe.
One observable symptom: it is not bobbing or floating in the water, regardless of the water height, and appears to be partially or fully upright.

2)  The chain is tangled.
A chain link can get stuck on the metal clip or loop over the top of the lever arm. Although an improper chain length causes many of these problems, “slapping” the flush handle can also cause the chain to hang up.

3)  A clogged drain/obstructed pipe produces back pressure through the flush valve seat.
The obstruction doesn’t allow the water level inside the tank to drop low enough for the flapper to seat properly. In this instance, the flapper appears to “hover” in the water above the flush valve seat. A clogged or obstructed drain pipe is the most common reason for toilets to overflow the bowl.

4)  A “universal” replacement flapper is purchased.
When a “universal” replacement flapper is purchased, it does not seat properly on the flush valve. Flappers should be purchased according to the type of flush valve used because universal flappers can leak and/or fail to seat up to 50% of the time.

5)  The flush handle/lever is old, defective, or “sticking” to the inside of the toilet tank.
Old or defective equipment can result in the flapper being held open.

6)  The flapper hinges are weakened and/or degraded.
This allows the flapper to slide to the side and not seat properly on the flush valve. (Note: the water flow from the fill valve can also push the flapper to one side if it is above 60 PSI.)

7)  A flapper’s buoyancy doesn’t become “negative” until the tank completely evacuates.
This does not allow the flapper to seat properly. Although there are several known causes (including toilet design), the most common is a clogged or obstructed drain pipe, which creates back pressure into the tank through the flush valve.

5 Common reasons why wide-open flappers often go undetected:

1)  No one is home to hear it running.
Often times, a person will use the bathroom before they leave their home (or business). In this case, a wide-open flapper would not be detected until the person returned home and realized the problem. This could be hours, or even the following day.

2)  The bathroom is not used frequently.
A wide-open flapper in secondary bathrooms (a finished basement or guest bathroom) can go undetected for days or weeks, wasting a tremendous amount of water and resulting in a high water bill.

3)  Hearing impaired/challenged people may fail to recognize a problem exists.
People with moderate to severe hearing loss may be unable to hear the running water. People afflicted with tinnitus may be unable to distinguish the sound of the running water from their tinnitus.

4)  The sound of the toilet tank refilling is a muted hum.
The initial flush of a toilet is loud, brief, and occurs while the user is still in the bathroom. However, the refilling of the toilet is quieter, prolonged, and typically finishes after the user has left the bathroom. Therefore, the user is unaware when the flapper remains wide-open.

5)  Background noise can easily mask the sound of a wide-open flapper or flush valve.
Examples include central air conditioners and HVAC systems (while the fan is operating); ceiling and window fans; music and/or TV; etc.